What gutter work looks like on Walterboro roofs.
Walterboro's pines and the pecans and oaks along Hampton Street and Wichman Street fill gutters year-round, and a long single-story run on a Forest Hills or Ireland Creek ranch means one clogged downspout backs up the whole side of the house. We install 6-inch seamless aluminum and recommend micro-mesh guards, and a wraparound porch on a Historic District home gets a half-round profile if the district asks for it.
On the Ireland Creek and Great Swamp sides, where the ground stays wet after a hard rain, getting water away from a low crawlspace ranch matters more than the gutter itself, so downspout extensions and splash blocks are part of the install. Rural lots off Sniders Highway often need gutters on a barn or shed roof that sheds onto the house side.
Walterboro's historic wraparound porches shed a lot of roof onto a low-slope porch that then has to carry it to a gutter at the porch edge, and a single downspout at one corner of a Hampton Street porch cannot keep up. We add downspouts at the corners the porch drains to, in a half-round profile where the district asks for it, and route discharge past the brick piers to ground that drains.
Fascia comes first on the 1960s ranches. Decades of pine straw and pecan leaves holding water in a Forest Hills gutter rot the fascia board behind it, and a new gutter hung on soft wood sags within a season. We probe the run, replace what is soft, wrap the fascia in matching trim coil, and hang the gutter on solid material, with the fascia work priced as its own line so an owner knows what was done on a visit an hour from our office.
1900s to 1930s historic homes on Hampton Street and Wichman Street with steep main roofs, low-slope wraparound porches and painted 5V or standing seam metal; 1950s to 1980s brick and frame ranches in Forest Hills, Ireland Creek and around the Country Club with long low-pitch runs and carports; 1990s and 2000s homes around Colleton Preparatory; rural lots off Bells Highway, Sniders Highway and toward the Great Swamp with houses, manufactured homes and metal barns and sheds.
Sixty minutes from Mount Pleasant out Highway 17 and Highway 64 or down Interstate 95 to the Bells Highway exit, the longest run on our map, so Walterboro jobs are scheduled from your photos and grouped with Hollywood, Ravenel and Summerville dispatches.
(843) 284-6333
Jeff Ramsden, founder. 5+ years as a VP at Reimagine Roofing, 1,000+ roofs overseen.
Call (843) 284-6333Every Walterboro gutter job starts with a free inspection. We look at the roof, photograph what we find, and give you a written price before any work starts.
What is included in every Walterboro job.
Asked in Walterboro.
How much do gutters cost in Walterboro?
Gutters in Walterboro cost $2,200 to $5,600 for 6-inch seamless aluminum and downspouts, and micro-mesh guards add about $8 to $12 a foot. Pines, plus the pecans and oaks along Hampton Street and Wichman Street, fill gutters all year. The written price comes before any work. Historic wraparound porches are the local variable, because a single downspout at one porch corner cannot keep up, so corners get added downspouts, in half-round where the district asks, and Ireland Creek ranches need water carried well away from low crawlspaces.
What roofing materials are approved in the Walterboro Historic District?
The City of Walterboro's approved materials list allows architectural asphalt or fiberglass shingles, standing seam metal, copper, wood shakes and slate on both historic and non-historic buildings in the district. High-quality 5V crimp metal is approved only for non-historic buildings, new construction, additions and accessory buildings. So swapping an old roof for 5V on a contributing historic house is not on the list. We confirm with the City whether your house is classed as historic and build the approval into the order.
Do I need 6-inch gutters?
On the coast, yes. Rainfall intensity here overwhelms 5-inch gutters on most roof pitches.
Do guards actually work with live oaks?
Micro-mesh does. Foam and brush inserts do not. We only install the mesh.
Can you install gutters without a new roof?
Yes. Gutters are a standalone job in one day.
What colors are available?
Over 20 standard colors to match trim or fascia.