What gutter work looks like on North Charleston roofs.
North Charleston's rail and highway corridors lay fine grit and diesel residue on roofs and gutters along Rivers Avenue, Dorchester Road and the I-26 side of Park Circle, and the older streets in Cedar Grove and Dorchester Terrace add tree debris on top of it. We install 6-inch seamless aluminum and recommend micro-mesh guards on the older pockets.
In the low streets near the Navy Yard and Noisette Creek and on the Ashley River side by Ashley Villas, getting water away from the slab matters more than anywhere else in the city, so downspout extensions and splash blocks are part of the gutter install. Wescott Plantation and Coosaw Creek two-stories usually need the 5-inch builder gutters upsized for the roof area.
Fascia comes first on the Navy-era cottages. Seventy years of tree debris and rail grit holding water in a Park Circle or Cedar Grove gutter rots the fascia board and the ends of the rafter tails, and a new gutter hung on that wood sags within a season. We open the edge, replace the rot, wrap the fascia in matching trim coil, and hang the gutter on solid material, with the fascia work priced as its own line.
Deep front porches on their own low-slope roof are a gutter problem as much as a roof problem: the porch gutter takes the main roof's discharge on top of its own rain, and a single downspout at the porch corner cannot carry it. We add a downspout at the porch, upsize the run, and on a Dorchester Terrace or Cedar Grove cottage, route the discharge past the slab to a spot in the yard that drains.
1940s and 1950s Navy-era cottages and bungalows around Park Circle, Dorchester Terrace and Cedar Grove with low-pitch gables, deep front porches under their own low-slope roof, and additions off the back; 1960s and 1970s brick ranches in Archdale, Whitehall, Ashley Villas and Windsor Hill on their second or third shingle; 1990s and 2000s two-story architectural-shingle subdivisions in Wescott Plantation and Coosaw Creek on their first replacement; 2000s and 2010s Oak Terrace Preserve craftsman-style homes with standing-seam porch accents. Owner-occupied pockets, not the apartment corridors along Rivers Avenue and Ashley Phosphate.
Twenty-five minutes from Mount Pleasant across the Don Holt Bridge on I-526, with Hanahan and Goose Creek on the same Berkeley corridor dispatch run.
(843) 284-6333
Jeff Ramsden, founder. 5+ years as a VP at Reimagine Roofing, 1,000+ roofs overseen.
Call (843) 284-6333Every North Charleston gutter job starts with a free inspection. We look at the roof, photograph what we find, and give you a written price before any work starts.
What is included in every North Charleston job.
Asked in North Charleston.
How much do gutters cost in North Charleston?
North Charleston gutters run $2,200 to $5,600 for seamless 6-inch aluminum and downspouts on most homes, and guards cost roughly $8 to $12 per foot. We recommend micro-mesh in the older Cedar Grove and Dorchester Terrace pockets, where tree debris lands on top of rail-corridor grit. Navy-era cottages add two variables: fascia rotted behind seventy years of wet debris, priced as its own line, and deep front porches whose gutter takes the main roof's discharge and needs an extra downspout and a bigger run.
Who issues the roofing permit for a house in North Charleston?
Inside city limits, the City of North Charleston's Building Department issues residential permits for new construction and renovations, which includes a re-roof, and it takes applications in person or through its online permitting portal. That holds whichever of the three counties your lot sits in. Parcels outside the city limits permit with their county instead, so we confirm your jurisdiction before we file and request the inspections ourselves.
Do I need 6-inch gutters?
On the coast, yes. Rainfall intensity here overwhelms 5-inch gutters on most roof pitches.
Do guards actually work with live oaks?
Micro-mesh does. Foam and brush inserts do not. We only install the mesh.
Can you install gutters without a new roof?
Yes. Gutters are a standalone job in one day.
What colors are available?
Over 20 standard colors to match trim or fascia.